Erdağ Construction & Decoration ve Duvar Kağıdı Mağazası | İstanbul 0212 672 43 06
Choosing Ceramic and Tile in Decoration

Choosing Ceramic and Tile in Decoration

2.959 views

Ceramic and Tile Selection Guide

Although the terms tile and ceramic are sometimes confused, technical differences exist between them. Porcelain ceramics are denser and far more resistant to water; for this reason they are preferred in floor applications.

PEI Abrasion Class: Indicates the abrasion resistance of floor ceramic. PEI 3 is recommended at home and PEI 4–5 in commercial areas.

Slip Resistance (R-value): R11+ products are safe for the bathroom floor. R9 or lower smooth surfaces are prone to slipping in wet environments.

Frequently Asked Questions

What is microcement, and can it be used in a bathroom?

Microcement is a cement-based coating applied a few millimetres thick, without joints, to floors, walls and worktops. Because it can also go over existing tiles, it allows renewal without demolition. It is used in bathrooms, but it must be applied to a waterproofed surface and finished with a waterproof protective coat. With no joints it is easy to clean; its look is matt and similar to concrete.

How are wall mouldings fitted, and can they go over wallpaper?

The wall is measured and the positions of the frames are marked; the mouldings are mitre-cut and glued, the joints are filled and the mouldings are painted together with the wall. They give the cleanest result on a painted wall. Mouldings can be fixed over wallpaper, but they must bond to the wall, not to the paper; otherwise they come away with it. The right order is mouldings and paint first, then wallpaper inside the frames.

How is a wall crack repaired?

A hairline crack is opened slightly, dusted, filled and sanded, then primed and painted. For cracks that keep reopening in the same place, the lasting solution is to cover the wall with glass textile or glass fleece before painting. Wide cracks are repaired with mesh and repair mortar. For cracks that run diagonally, keep widening or follow columns and beams, a structural engineer should be consulted first.

All frequently asked questions →

Reviews

No reviews yet. Be the first to leave one!

Leave a Review