Erdağ Construction & Decoration ve Duvar Kağıdı Mağazası | İstanbul 0212 672 43 06
Concrete-Look Walls with Spatula Paint

Concrete-Look Walls with Spatula Paint

3.549 views

Spatula Paint: Industrial Aesthetics

Concrete-effect surfaces have become an indispensable element of interior design since the early 2020s. Instead of using expensive, heavy real concrete, it is possible to achieve the same visual effect with spatula paint.

Material Selection

Spatula paints used for a concrete look consist of Portland cement, sand and special pigments. Some products contain acrylic and are easier to apply. A polymer additive can be added to increase the flexibility of the surface.

Colour Palette

The natural concrete colour is light grey. Adding anthracite, dark smoke or white to it captures different tones. Using rust red or yellowish oxide as accent colours creates a rich texture.

Application Steps

A three-stage application is done: primer + two spatula coats + protective varnish. Each layer is left to dry for 24 hours. The direction and angle of the spatula movement determine the final texture; this is why experienced application is essential.

Common Mistakes

  • Skipping the primer → poor adhesion
  • Keeping the layer too thick → cracking
  • Not allowing enough drying time → leaving marks
  • Forgetting the final varnish → vulnerability to stains

Frequently Asked Questions

What determines the price per square metre of Italian paint?

Labour sets the price more than material. The technique chosen, the number of coats (2 to 4 depending on the technique), how much preparation the wall needs, the area and the ceiling height all change the total. Glossy, multi-coat techniques need more preparation because they require a perfectly flat surface. That is why we do not quote per square metre without seeing the wall; in a free survey we show samples and give a written quote.

Can Italian paint be wiped clean?

Yes, if it has a protective final coat. A surface sealed with wax or a clear protective coat is wiped with a soft, damp cloth; a few drops of neutral soap can be added to the water if needed. An unprotected lime-based surface is porous and absorbs stains. Vinegar, limescale remover, bleach and scouring pads are not used. In our applications the protective final coat is part of the job.

Is Italian paint water-resistant?

When sealed with a water-repellent protective coat it withstands splashes and humidity, so it can be used on bathroom and kitchen walls. On surfaces that are constantly wet, such as inside a shower, only the system the manufacturer recommends for wet rooms should be applied; otherwise tiles are safer. Lime-based finishes let water vapour through, so they do not stop the wall from breathing.

All frequently asked questions →

Reviews

No reviews yet. Be the first to leave one!

Leave a Review