Erdağ Construction & Decoration ve Duvar Kağıdı Mağazası | İstanbul 0212 672 43 06
Italian Paint or Wallpaper? Which Wall Suits Which?

Italian Paint or Wallpaper? Which Wall Suits Which?

86 views

If you want pattern, choose wallpaper; if you want texture and depth, choose Italian paint. The short rule: Italian paint for a wide, flat wall that catches the light; wallpaper for a wall that needs pattern to give it character or that will be redone often.

Choosing wall by wall

  • TV wall: Italian paint; it gives a seamless surface around cables and niches.
  • Behind the bed: wallpaper; pattern and a soft texture suit a bedroom.
  • Entrance and hallway: Italian paint or wipeable vinyl wallpaper.
  • Child's room: wallpaper; it is easily changed as the child grows.
  • Bathroom and kitchen: decorative paint with a protective coat, or vinyl-surfaced wallpaper.
  • Columns, curves and niches: Italian paint; wallpaper shows seams on these surfaces.

Renewal

Wallpaper is stripped and replaced. Italian paint is permanent; changing it means a primer and a new coat on top.

The condition of the wall

Non-woven wallpaper covers a hairline crack. Glossy marmorino needs a perfectly flat wall.

Can both be used in the same room?

Yes, and that is often the most balanced result: decorative paint on one wall, plain or finely patterned wallpaper opposite. Erdağ Yapı does both decorative paint and wallpaper installation; you can see wallpaper designs at ithalduvarkagit.com.

Frequently Asked Questions

Can you paint over Italian paint?

Yes. With a suitable primer a decorative finish can be changed to plain paint or to another technique. Deeply textured surfaces are first filled and sanded; if there is wax or polish, that layer is removed or a bonding primer is used so that the paint adheres. If paint is applied straight over the texture, the pattern keeps showing through the paint.

How is Italian paint applied?

In four stages: the wall is levelled with filler and sanding, a primer specific to the technique is applied, the product is worked with a steel trowel in 2 to 4 coats depending on the technique, and finally a protective coat goes on. Drying time is left between coats and the texture is made by hand in each one. Because the result depends on the applicator, seeing a sample before deciding matters. In our applications one wall usually takes 1 to 3 days.

How is travertine-effect paint done?

A coarse-grained, lime-based finish is trowelled onto the wall and, while wet, dragged horizontally with a brush or trowel to form the pores and veins of the stone. The surface is lightly flattened, joints can be scored to give the look of stone blocks, and once dry a protective or tinting final coat is applied. No stone is fixed to the wall; the finish is a few millimetres thick and adds no load.

All frequently asked questions →

Reviews

No reviews yet. Be the first to leave one!

Leave a Review