Erdağ Construction & Decoration ve Duvar Kağıdı Mağazası | İstanbul 0212 672 43 06
Solutions for Walls with Damp and Mould Problems

Solutions for Walls with Damp and Mould Problems

2.711 views

Wall Damp and Mould Solutions

Wall damp is a common problem affecting a significant portion of homes in Istanbul. For a lasting solution, the source of the moisture must first be identified, then appropriate repair and protection methods applied.

Sources of Damp

  • Lack of facade insulation
  • Roof or terrace water leakage
  • Condensation (hot-cold air difference)
  • Faulty plumbing

Health Effects

Mould spores trigger respiratory diseases. They cause worsening in allergy and asthma patients. For this reason a permanent solution is essential for both health and structural integrity.

Solution Steps

The mouldy surface is cleaned with bleach (1% sodium hypochlorite). The surface is fully dried. An antifungal primer is applied. It is painted with a moisture-preventing nano-technology paint.

Permanent Solution

Surface paint is a temporary solution. For a lasting result, thermal insulation on the facade, roof waterproofing or a reactive waterproof coating system on the interior surface must be applied.

Frequently Asked Questions

How many years does wallpaper last?

Giving a single number would not be right; its life depends on the type of paper, the preparation of the wall and how the room is used. Non-woven papers with a vinyl surface stay in use for many years on a dry, properly primed wall. The main things that shorten its life are damp, direct sun and wrong cleaning. When seams start to open, the colour fades or the surface blisters, it is time to renew it.

How long does wallpaper take to dry after hanging?

The paste takes a day or two to dry, depending on the temperature and humidity of the room. During this time do not open windows to create a draught or try to dry the room quickly with a heater; fast drying makes seams open. Small bubbles seen on the first day mostly disappear by themselves as the paper dries. If a bubble remains or a seam opens after drying, tell the installer who did the work.

How is wallpaper removed?

Non-woven papers can usually be pulled off dry, strip by strip, starting from a corner. Paper-backed and old wallpapers are first soaked with warm water or stripping solution and lifted with a scraper once the paste softens; a steamer is used on stubborn areas. After stripping, paste residue is washed off the wall, damaged areas are filled and the wall is primed. We carry out stripping and surface preparation together with the new installation.

All frequently asked questions →

Reviews

No reviews yet. Be the first to leave one!

Leave a Review