Erdağ Construction & Decoration ve Duvar Kağıdı Mağazası | İstanbul 0212 672 43 06
Lighting Layers in Decoration

Lighting Layers in Decoration

3.391 views

Guide to Lighting Layers

Good interior lighting consists of three basic layers. Using these layers together increases both functionality and aesthetic depth.

1. Ambient Lighting

The ceiling fixture or pendant lamp that provides the room's general brightness. It fills the whole room with homogeneous light. A dimmer feature makes ideal control possible.

2. Task Lighting

Focused light for an activity such as reading, cooking or applying make-up. A desk lamp, under-counter kitchen spots and a lamp beside the bathroom mirror fall into this category.

3. Accent Lighting

Used to highlight an object, painting or architectural detail. Spotlights, LED strips and lighting within niches are in the accent category.

Light Temperature

2700–3000K (yellow-white) warm light is ideal for the living room and bedroom; 4000–5000K (daylight) is ideal for the kitchen and bathroom.

Frequently Asked Questions

What is microcement, and can it be used in a bathroom?

Microcement is a cement-based coating applied a few millimetres thick, without joints, to floors, walls and worktops. Because it can also go over existing tiles, it allows renewal without demolition. It is used in bathrooms, but it must be applied to a waterproofed surface and finished with a waterproof protective coat. With no joints it is easy to clean; its look is matt and similar to concrete.

How are wall mouldings fitted, and can they go over wallpaper?

The wall is measured and the positions of the frames are marked; the mouldings are mitre-cut and glued, the joints are filled and the mouldings are painted together with the wall. They give the cleanest result on a painted wall. Mouldings can be fixed over wallpaper, but they must bond to the wall, not to the paper; otherwise they come away with it. The right order is mouldings and paint first, then wallpaper inside the frames.

How is a wall crack repaired?

A hairline crack is opened slightly, dusted, filled and sanded, then primed and painted. For cracks that keep reopening in the same place, the lasting solution is to cover the wall with glass textile or glass fleece before painting. Wide cracks are repaired with mesh and repair mortar. For cracks that run diagonally, keep widening or follow columns and beams, a structural engineer should be consulted first.

All frequently asked questions →

Reviews

No reviews yet. Be the first to leave one!

Leave a Review